1. Usb Serial Port Mac
2. Best Serial Port Connection Tool For Macbook Pro

Serial Port Utility by Darkwood Studio is a program that can manage and communicate with devices attached to serial ports. Even if there is no version of Serial Port Utility for Mac released yet, try similar applications to monitor serial ports. Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal), UDP/IP terminal and TCP/IP Client Server terminal. It was created for HW group internal use only, but today it's includes many functions in one utility and it's Freeware! You can configure the system to allow logins from a terminal over a serial port by seting up a getty(1) session on the serial port - getty is the tool for setting up a terminal and allowing logins onto it.

Is there a way to connect to a serial terminal just as you would do with SSH? There must be a simpler way than tools such as Minicom, like this

I know I can cat the output from /dev/ttyS0 but only one way communication is possible that way, from the port to the console. And echo out to the port is just the same but the other way around, to the port.

How can I realize two way communication with a serial port the simplest possible way on Unix/Linux?

ihatetoregisterihatetoregister

16 Answers

I find screen the most useful program for serial communication since I use it for other things anyway. It's usually just screen /dev/ttyS0 <speed>, although the default settings may be different for your device. It also allows you to pipe anything into the session by entering command mode and doing exec !! <run some program that generates output>.

Shawn J. GoffShawn J. Goff

Background

The main reason why you need any program like minicom to communicate over a serial port is that the port needs to be set up prior to initiating a connection. If it weren't set up appropriately, the cat and echo commands would not do for you what you might have expected. Notice that once you run a program like minicom, the port is left with the settings that minicom used. You can query the communication settings using the stty program like this:

If you have done it right; after booting the computer and before running any other program like minicom, the communication settings will be at their default settings. These are probably different than what you will need to make your connection. In this situation, sending the commands cat or echo to the port will either produce garbage or not work at all.

Run stty again after using minicom, and you'll notice the settings are set to what the program was using.

Minimal serial communication

Basically, two things are needed to have two-way communication through a serial port: 1) configuring the serial port, and 2) opening the pseudo-tty read-write.

The most basic program that I know that does this is picocom. You can also use a tool like setserial to set up the port and then interact with it directly from the shell.

rozcietrzewiaczrozcietrzewiacz

I found a way using a shell script here that put cat as a background process and a while loop that read the user input and echo it out to the port. I modified it to be more general and it fitted my purpose perfectly.

heemaylihatetoregisterihatetoregister

If UUCP is installed on the system, you may use the command cu, e.g.

Try http://tio.github.io

'tio' is a simple TTY terminal application which features a straightforward commandline interface to easily connect to TTY devices for basic input/output.

Typical use is without options. For example:

Which corresponds to the commonly used options:

It comes with full shell auto completion support for all options.

Thomas

This script is based on another answer, but sends everything over the serial port (except Ctrl+Q), not just single commands followed by Enter. This enables you to use Ctrl+C or Ctrl+Z on the remote host, and to use interactive 'GUI' programs like aptitude or alsamixer. It can be quit by pressing Ctrl+Q.

BTW, the putty package (which does run on Linux) does include serial support.

mdpcmdpc

Putty works well on Linux and offers some convenience, especially for serial communications. It has one drawback I haven't been able to directly solve: no copy-paste from the Putty window itself. The windows version has a lovely auto-copy to clipboard on highlight, right-click to paste behaviour (and there are excellent plugins for both chrome and firefox to enable the same behavior), but on Linux, no copy love AFAIK.

If the lack of copy is a problem (it is for me) then turn on logging in putty and open a standard terminal window and # tail -f putty.log and bidirectional text is available for standard copypasta action.

Another issue that can occur is that your user account may need to set to the 'dialout' group to access the serial port.

GAD3R

It depends on what you want to do. Do you want to run a shell or applicaiton interactively from the terminal, connect out to another computer over the serial line, automate communication with a device over a serial port?

If you want bidirectional communication then I presume you want something interactive with a human on the terminal. You can configure the system to allow logins from a terminal over a serial port by seting up a getty(1) session on the serial port - getty is the tool for setting up a terminal and allowing logins onto it. Put an entry in your inittab(5) file to run it on the appropriate serial port on a respawn basis.

If you want to connect to a device and initiate automated two way conversations then you could see if expect will get you what you want. Use stty(1) to configure the port to the right parity, baud rate and other relevant settings.

If you want to communicate interactively with another computer over the serial port then you will need terminal emulation software. This does quite a lot - it sets up the port, interprets ANSI or other terminal command sequences (ANSI was far from being the only standard supported by serial terminals). Many terminal emulators also support file transfer protocols such as kermit or zmodem.

• Download the program for free (EXE and DMG (in ZIP file) available) Using TrasnMac to convert DMG to IPSW: • Go to File -> Open menu.

The ins and outs of serial communications and terminal I/O are fairly complex; you can read more than you ever wanted to know on the subject in the serial howto.

As mentioned before you can try picocom. The latest release (2.0) can also be used (safely) to set-up a 'terminal server' since it no longer permits shell command injection. See:

You might want to take a look at

Pro: doesn't have obvious security problems like minicom or picocom (if you don't have a problem giving the users shell access, no problem, but you most likely do have one if you want to set up a terminal server..)

You need to be sure to have the correct read write permits on the device, you could see it with:

I rely on the script you found and made some modifications.

For the development systems I've used by now, they used to need:

• None parity and
• One stop bit

Those values are the default ones in the script.

So in order to connect, you can use it as simple as follows:

Example:

Script:

P.S.: You need to know which kind of line feed is using your receiver system since this will determine how you'll need to send the commands in my case I needed a Windows like LF, means that I need to send

ASCII values for:

• LF : 0Ah, line feed 'n'
• CR : 0Dh, carrige return 'r'
• BS : 08h, back space '<-'

As it is not mentioned here already, I'd also mention socat - more info in https://stackoverflow.com/questions/2899180/how-can-i-use-com-and-usb-ports-within-cygwin :

or

(though, I've had the problem of stopping it once it starts running, under MSYS2 on Windows)

I wonder why nobody mentioned ser2net.

Example /etc/ser2net.conf:

You can connect to serial port as easy as:

Or remotely:

Or even set up port forwarding on your router and expose it to Internet, so that you could connect to it from anywhere (let's skip security issues, I'm talking about flexibility).

Another easy option is to access the machine over ssh with the -X flag and run a program such as putty or gtkterm.

So:

It should launch the graphical interface on your client PC and from there you can access the serial port as if you would be in the host.

Disclaimer: Only tried this with ubuntu machines. I'm guessing that it won't work with machines without graphic interfaces.

From the ssh manual:

-X

Enables X11 forwarding. This can also be specified on a per-host basis in a configuration file. X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring. For this reason, X11 forwarding is subjected to X11 SECURITY extension restrictions by default. Please refer to the ssh -Y option and the ForwardX11Trusted directive in ssh_config(5) for more information.

-Y

Enables trusted X11 forwarding. Trusted X11 forwardings are not subjected to the X11 SECURITY extension controls.

Usb Serial Port Mac

So use -Y if security is an issue.

Not the answer you're looking for? Browse other questions tagged command-lineterminalttyserial-portserial-console or ask your own question.

Version 1.6.0.3.708:

New/Changed Features:

• Added 'Open Recent' menu item. Recent items are saved between sessions.
• Added 'Close All' menu to close all open window.
• Added capability to restore the previous sessions. If enabled via the Preferences, the current session is saved if CoolTerm is quit via File/Quit (macOS/Linux) or File/Exit (Windows). CoolTerm will attempt to restore all the open terminal windows from the previous session at the next start.
• Added context menu for Copy/Paste operations to plain text display.
• Replaced option to stop Autoscrolling with option to pause the display instead. When enabled, the display contents are not updated until pausing the display is disabled again. Opening and closing the port automatically un-pauses the display.
• Added baud rate selector in the connections to allow setting a custom baudrate. The custom baudrate can be saved as part of the connection settings.
• The font size for text input fields (line mode input field 'Send String' input field) can now be set independently via the preferences.
• Added preferences option to automatically refresh the list of serial ports when opening the connection options.
• Added preferences option to check for development releases when checking for updates.
• [Mac] Added the following AppleScript commands:
• WindowIDfromName(WindowName as string) as integer
• SaveSetting(ID as integer, FilePath as String) as boolean
• CoolTermVersion as string
• RescanSerialPorts
• SerialPortCount as integer
• SerialPortName(SerialPortIndex as integer) as string
• GetCurrentSerialPort(ID as integer) as integer
• SetCurrentSerialPort(ID as integer, SerialPortIndex as integer) as boolean
• GetParameter(ID as integer, ParameterName as string) as string
• SetParameter(ID as integer, ParameterName as string, Value as string) as boolean
• GetAllParameters(ID as integer) as string
• Added support for dark mode on platforms that support it (such as macOS Mojave).
• Supporting Raspberry Pi
• Default is now 64-bit for all platforms (except Raspberry Pi)

Improvements:

• File/Save menu item is now permanently enabled. Selecting File/Save when settings have not previously been saved will present the user with a 'Save As..' dialog.
• Connection Settings saved as default no longer contain the selected serial port and window position. New windows using the default settings will select the first available port rather than trying to force a port that may or may not be available.
• The text and background color settings for the text display are now also applied ot the line mode input text field.

Bug Fixes and Stability Improvements:

Best Serial Port Connection Tool For Macbook Pro

• Fixed bug where the receive buffer size wouldn't be set upon loading of connection settings.
• Fixed bug that causes setting to not be properly loaded on Mac when starting CoolTerm for the command line with a settings file as argument or when starting CoolTerm by double-clicking a settings file or dragging it onto the CoolTerm icon.
• [Mac] Disabled splash window for macOS Sierra and newer.